Stamped-Rectangular Finned Serpentines

For stamped-rectangular finned serpentines, the fin and tube assembling method is determined according to available dies, material type of tube and fin. Applicable methods for assembling the fin and tube are specified in the below table:

Hot dip galvanization or dip soldering process is an alternative method, used instead of internal expanding. After stamps are lined on tubes, instead of internal expanding, dip galvanization is applied for carbon steel tube serpentines and dip soldering is applied for copper and copper alloyed tube serpentines. By this method, while supplying full contact between the tube and fins; consequently heat transfer reaches to maximum. Oxidation speed is reduced and usage life of products is extended with this coating.

We have many dies with single, double and triple tubes as listed in the below table; and also it is possible to design new special dies according to projects.

Boru sayısı Number of Tubes	Pul Detayı                            Detail of Stamp		Boru Detayı     Detail of Tube       ( ØD / CXD Oval )	Hatve   Pitch      (h)
	ÖLÇÜ Dimension (AXB)	Kalınlık         Thickness                    (t)
Tek Boru       Single Tube	60x35	0,4	35x14 Oval	3/7
	55,5x26,5	0,4	33x12,5 Oval	2,5
	55x26	0,4	35x14 Oval	2 /3 /3,5
	50x50	0,8	Ø 21,2	6
İki Boru  Double Tube	84,5x26	0,4	Ø 28x10,5 Oval	3
	145x70	2	Ø 38,6	7
	99x49	0,4	Ø 27,5	4
	95x41	0,4	Ø 16,2	7
	88x38	0,4	Ø 21,8	4
	88x38	0,4	Ø 20,5	4
	63x33	0,4	Ø 15,6	3
	62x37	0,4	Ø 20,3	3
	62x37	0,4	Ø 16,5	3
	49x25	0,4	Ø 11,8	3/7
	49x25	0,4	Ø 8,5	3/7
	31x16	0,4	Ø 10,3	1,5
Üç Boru Triple Tube	90x48	0,4	30,6x15 Oval	3/7
	196x65	1,5	Ø 26,5	6

AKIŞKAN TİPLERİ
Hava, su, deniz suyu, yağ, buhar, kızgın yağ, kimyasal içerikli sıvılar
 KULLANIM YERLERİ  
Tekstil makineleri hava ısıtıcıları,Kurutma makineleri hava ısıtıcıları,Klima santral hava ısıtıcıları,Hava soğutucuları ,Turbo şarj soğutucular,Yağ soğutucuları,Su soğutucuları

 

KANAT DETAY BİLGİLERİ
Kanat Ölçüsü	AxB  118x38- 99x49-95x41 88x38- 63x33-62x37 49x25- 1x16 mm
Kanat Kalınlığı	t  0.4 mm
Hatve	h 1.5-5 mm
İlgili Resim	Şekil 1 ve 2