Open Circuit Cooling Towers

Open Type Cooling towers reject heat from water-cooled systems to the atmosphere. Hot water from the system enters the cooling tower and is distributed over the fill (heat transfer surface). Air is induced or forced through the fill, causing a small portion of the water to evaporate. This evaporation removes heat from the remaining water, which is collected in the cold water basin and returned to the system to absorb more heat.

THE ONLY ONE MANUFACTURER in TURKEY:
Konuk ISI is the only one manufacturer in Turkey that produces FRP and Steel open type cooling towers in its factory.

HIGH EFFICIENCY PERFORMANCE:
The process cold water temperature can approach to the air wet bulb temperature regardless of how dry air temperature is so high.

LOW INITIAL INVESMENT COST:
The Initial investment cost is very low, resulting in the use of highly efficiency fill.

EASY & QUICK INSTALLATION:
Since all products are factory assembled, the cooling tower consists of two or three units. In places where installation is required, these units are mounted on top of each other so that the installation can be completed very easily and quickly.

7/24 MAINTENANCE SERVICE
With our expert staff and advanced service network, our company can provide 7 days and 24 hours maintenance service.

Structure and External Casing
The Z-725 Mill Hot-Dip Galvanized Steel Construction is the heaviest level of galvanizing available for manufacturing closed circuit coolers and has more zinc protection than competitive designs using Z-275 and Z-600 steel

Fan
The standard fans are heavy duty statically balanced axial propeller type. The fans are constructed of extruded aluminum alloy blades, installed in a closely fitted cowl with venturi air inlet for maximum fan efficiency. Each fan blade is individually adjustable. The fan cowl is covered with a heavy gauge hot dip galvanized wire fan guard.

Fills
Fills improve water distribution by splitting the water stream as it descends through the fill pack. High thermal performance and low pressure drop are balanced by utilizing advanced design and maintaining the highest manufacturing standards.

Electric Motor
Frame Sizes:56-200 Outputs:1,1 KW-30KW No. of Poles:4, 6, 8 Degrees of Protection: IP55, IP56, IP65 Voltage: rated supply of 400V, supply from 110V to 690V may be supplied on request frequency: 50 Hz or 60 Hz Motor frame sizes: 132 to 450 for cost iron isolation class: F as standart